OSH800C Disposable BIS-Compatible EEG Sensor for Anesthesia Monitoring
Model/Type:
Email:
Product Details
Single-use EEG sensor
Real-time monitoring of anesthetic depth presents a comprehensive challenge to the expert in addressing individual differences in anesthesia.
The single-use EEG sensor not only provides you with the well-recognized monitoring and assessment of EEG-based consciousness states, but also offers additional, enhanced features to meet clinical needs. It is based on the interpretation of EEG signals.
Technical Overview
Materials: The EEG sensor is latex-free and uses imported conductive adhesive. It exhibits excellent biocompatibility, is non-toxic, does not cause skin irritation, does not trigger allergic reactions, and has low impedance.
Product Application Scope
Primarily used in conjunction with monitoring devices to detect patients’ EEG signals, this system works in tandem with monitoring instruments to non-invasively measure both EEG and EMG signals from patients.
Product Features
Non-invasive measurement with high sensitivity, strong adhesion, and compact size.
Instructions for Use
Clean the skin with plain water or a medical exfoliating scrub to remove sweat and oil stains from the skin.
Tear open the packaging along the V-shaped opening and remove the sensor.
Remove the electrode and affix the sensor in the position shown in the diagram. (Note: When attaching the sensor, avoid pressing on the circular central area of the sensor to prevent the conductive adhesive from overflowing.)
Affecting the adhesion and use of electrodes.
Electrode 1: Located 5 cm directly above the bridge of the nose, at the center of the forehead.
Electrode 2: Placed flatly between electrodes 1 and 4.
Electrode pad 3: Located at the temple.
Electrode pad 4: Located above the eyebrows
Insert the sensor plug into the corresponding interface on the lead wires.
This product can be operated by healthcare professionals.
Individuals with skin allergies should use this under the guidance of medical personnel.
Do not fix this product to areas of the patient where there is tissue damage.
This product can be used continuously for long periods of time.
Previous page
Next page
Previous page
OSH800A Compatible Entropy Sensor
Next page
Inquiry